Fort Worth, Tarrant County
Epoxy Flooring in Fort Worth, TX
Restoring aged Tarrant County concrete — old coatings removed, cracks repaired, floors rebuilt to last.
Free Epoxy Estimate in Fort Worth
Send us your Fort Worth address and square footage and we'll bring a moisture meter to the estimate.
(817) 371-0170Fort Worth is an older city than most of its neighbors, and the flooring work here reflects that. A large share of the homes we coat west and south of downtown were built between the 1950s and the 1980s, which means the slab under your garage has already lived through fifty or more Texas summers. It has moved with the clay, it has been painted at least once by a previous owner, and it usually has a crack or two that someone patched with the wrong product.
That is not a problem — it is simply a different job than coating a new slab. Restoring mature concrete takes more preparation hours than a fresh pour, and skipping that preparation is why so many Fort Worth garages have a peeling gray floor in them right now. We price the prep honestly, do it completely, and back the finished floor with a lifetime warranty against peeling and delamination.
Why older Fort Worth slabs need more preparation
North Texas sits on expansive clay. It swells when it rains and shrinks when it bakes, and a slab poured in 1968 has ridden that cycle for decades. The result is the settling and hairline cracking we see in Arlington Heights, Fairmount and the older Ridglea streets almost every week. Those cracks are not structural failures in most cases, but they will telegraph straight through a coating if they are not addressed before the first coat goes down.
Older garages also tend to carry history on the surface. Latex garage paint, a 1990s roll-on kit, tire marks burned into unsealed concrete, oil that has soaked an inch deep into the pour. None of that can be coated over. Every square foot gets diamond ground back to clean, open concrete so the primer bonds to the slab itself rather than to somebody else's failed product.
- Full mechanical removal of paint, sealers and previous coatings — no chemical shortcuts
- Crack chase-and-fill: cracks are cut open, cleaned and filled with a rigid polyurea before coating
- Oil and hot-tire contamination degreased and ground out before primer
- Spalled edges and pitting rebuilt with patch mortar so the finish reads flat
Detached garages and shop buildings
Detached garages are far more common in Fort Worth than in the newer suburbs to the north, and they behave differently. They are rarely conditioned, they often sit lower than the house, and many were poured without a vapor barrier under the slab. That combination means a detached garage floor can carry noticeably more moisture than an attached one on the same lot.
We take a calcium chloride or relative-humidity reading in every detached structure before quoting a system. If the numbers come back high, the floor gets a moisture vapor barrier as part of the buildup. It costs more on paper than a two-coat kit and it is the difference between a floor that lasts twenty years and one that bubbles in a single August.
Light industrial along the Alliance corridor
North Fort Worth around the Alliance corridor is a different market again — distribution, fabrication, service bays and flex space. Those floors care about abrasion resistance, forklift traffic and chemical spills more than they care about looks, and they usually need to go back into service fast.
For those buildings we typically specify a high-build flake or a grind-and-seal system with a fast-return topcoat, scheduled around shift changes or across a weekend so the bay is running again Monday morning. Line striping, safety-yellow walkways and anti-slip aggregate are all part of the same install rather than a second visit.
What a Fort Worth restoration install looks like
Day one is almost entirely preparation: clear the space, diamond grind the full surface, cut and fill cracks, patch spalls, vacuum to dust-free. Day two is the coating itself — primer or MVB, base, flake or metallic broadcast, then scrape and vacuum. Day three is the clear topcoat, chosen for UV stability if the space sees direct sun through an open door.
You can walk on the floor the next morning. Vehicles go back after roughly seventy-two hours of cure, which matters in an un-air-conditioned garage where daytime temperatures swing thirty degrees. We give you the actual return-to-service window for your slab and the weather that week, not a generic number.
Areas of Fort Worth we cover
- Arlington Heights
- TCU / Westcliff
- Ridglea
- Fairmount
- Alliance corridor
- Tanglewood
- Downtown Fort Worth
There is no travel charge anywhere inside the Dallas–Fort Worth Metroplex, so if your street is not on this list we still cover it. Call (817) 371-0170 and we will confirm scheduling for your address.
Systems we install in Fort Worth
The most economical way to bring an aged slab back when you want the concrete look kept.
Flake hides the minor imperfections older slabs keep, and it is the workhorse system for 1960s–80s garages.
Essential in detached garages poured without under-slab plastic.
Fast-return systems for service bays, warehouses and fabrication space.
Comparing budgets first? See our Dallas–Fort Worth epoxy flooring cost guide or browse recent DFW before-and-after projects.
Book a free Fort Worth estimate
On-site slab inspection, a moisture reading, and a fixed written quote backed by our lifetime warranty against peeling and delamination. Mon–Sat, 7AM–6PM.