Plano, Collin County

    Epoxy Flooring in Plano, TX

    Designer metallic and premium flake finishes for Collin County garages that get used as more than parking.

    Free Epoxy Estimate in Plano

    Tell us your Plano bay count and what the space is used for — we'll bring samples that suit it.

    (817) 371-0170

    Plano garages are big. Most of the housing stock here went up between the mid-1980s and the mid-2000s, and three-car bays are the norm rather than the exception. That extra bay almost never holds a third car. It holds a squat rack, a woodworking bench, a golf simulator, a car that gets shown, or a Peloton and a wall of cabinets.

    When a garage is a room people actually spend time in, the flooring conversation changes. Plano homeowners rarely ask us for the cheapest thing that will hold up. They ask what will look genuinely good under LED lighting with the door open — and that is why this is the strongest metallic market in the metroplex for us.

    Metallic finishes: the most requested system in Plano

    A metallic floor is a pigmented resin that is manipulated while it is still wet, so the mica pigments pool, drift and separate the way stone does. The result reads like polished marble or hammered copper, no two floors are identical, and there is real depth to look into rather than a flat sheet of color.

    Every metallic we install in Plano goes down over a moisture vapor barrier. That is not an upsell we make selectively — metallic is the least forgiving system there is when vapor pushes up from below, because the first thing moisture does is lift the resin into blisters you cannot patch invisibly. The MVB is in the base price of every metallic quote we write.

    • Graphite and pewter tones for modern builds around Legacy West
    • Warm bronze and copper for traditional brick homes in Willow Bend
    • Black-and-silver marble effects, the most requested combination we install
    • Satin or high-gloss topcoat, with anti-slip aggregate available in either

    Garage gyms, workshops and show bays

    How you use the space drives the topcoat more than the color does. A garage gym takes dropped weight, so we specify a thicker build and a topcoat with impact tolerance rather than a thin decorative clear. A woodworking shop cares about dust and solvent resistance and wants a satin finish that does not show every footprint. A show bay wants gloss, and it wants a floor that photographs well.

    Plano's slabs are generally in our favor here. Mid-1980s to mid-2000s concrete is old enough to have finished its initial cure and settled into place, but young enough that we rarely see the deep settling cracks common further west. Prep is usually a clean diamond grind, minor crack fill, and straight into the buildup — which means more of your budget goes into the finish rather than the repair.

    Premium flake for people who want texture, not shine

    Not everyone wants a mirror. A full-broadcast flake system — chips troweled in until the base is completely hidden, then ground flat and clear-coated — gives you a subtle stone-like texture, excellent slip resistance, and a surface that hides dust between cleanings far better than a solid color.

    We carry fifty-seven Torginol blends, and in Plano the quiet greys, blacks and warm neutral blends outsell the bright ones considerably. Bring us a cabinet door or a paint chip and we will match a blend to the rest of the space.

    Timeline and living with the install

    A three-car Plano garage typically runs three days: grind and prep, MVB and base with broadcast, then topcoat. Metallic adds a day because the pigment layer has to cure fully before the clear goes over it. The garage needs to be empty for the whole window, so we schedule around your calendar rather than dropping in and stranding you.

    Foot traffic the next morning, vehicles after seventy-two hours. Wide garage temperature swings are normal here since almost nobody conditions the space, so we adjust the resin's cure package to the week's forecast rather than running the same mix year-round.

    Areas of Plano we cover

    • Willow Bend
    • Legacy West
    • Deerfield
    • Kings Ridge
    • West Plano
    • Preston Meadow

    There is no travel charge anywhere inside the Dallas–Fort Worth Metroplex, so if your street is not on this list we still cover it. Call (817) 371-0170 and we will confirm scheduling for your address.

    Systems we install in Plano

    metallic epoxy floors for Plano garages

    The designer finish that drives most of our Collin County work.

    full-broadcast flake systems

    Fifty-seven Torginol blends, matched to your cabinetry and wall color.

    why we put an MVB under every metallic floor

    The single line item that keeps a designer floor from blistering.

    current DFW epoxy pricing by system

    Real per-square-foot ranges for flake and metallic before you book an estimate.

    Comparing budgets first? See our Dallas–Fort Worth epoxy flooring cost guide or browse recent DFW before-and-after projects.

    Book a free Plano estimate

    On-site slab inspection, a moisture reading, and a fixed written quote backed by our lifetime warranty against peeling and delamination. Mon–Sat, 7AM–6PM.